User manual
15
www.3onedata.com
Chapter 6 WEB Management
IES6116 series have WEB server inside, can manage and maintenance the device
very intuitive through
WEB interface
6.1 Configurate preparing
1. The lowest requirement for user's computer is as below:
Install operating system (Windows XP/2000/Win7,etc)
Install Ethernet card
Install Web explorer (IE6.0 or higher version)
Install and start TCP/IP protocol
2. The default management IP address of IES6116 series: 192.168.1.254, subnet mask as:
255.255.255.0. Before access to the configuration interface, the computer's IP address and the switch
must be configured in the same subnet (IP address configuration, please refer to "5.1") if need local
configuration; Computers and switches must be routed reach if for remote configuration.
How to log on to Web Server
Please type in the default IP of switch on the
browser‟s address bar, and then will pop-up a window
by clicking the “enter” key which shows you have to enter your user name and password. The default
username and password is “admin”. You can enter your username and password 3 times if you found the
username and password is incorrect. If the 3 input error, the browser will display a "401 Unauthorized"
error message. Refresh the page and then enter the correct user name and password, log on to the Web
Server, it will recommend to modify the user name and password. Please contact our customer service
center if you have more questions.
(Figure 6.1.1)
