![background image](http://html.mh-extra.com/html/3m/edge-eg5/edge-eg5_user-manual_442993045.webp)
Viewing measurements on the display
Locking or Securing
36
Locking or Securing
How to lock or secure
1. Turn the dosimeter on and press the
button to begin logging your study.
2. To enable the lock, press
button three consecutive times within one second intervals.
The Lock screen will appear.
Figure 4-9: Locking/Securing run
NOTE:
If lock/secure run does not activate, please check that locking is set-up on your
dosimeter. Please see “How to set-up secure/lock” for further details.
Unlocking
How to unlock
1.
To unlock, press
button 3 consecutive times, within one second intervals, and then press the
button.
a.
If the padlock icon and the key indicator were on the screen, these will vanish and the
measurement view will appear along with the run indicator.
b.
If you enabled the lock feature (with the key indicator showing and the measurement view
showing), then the key indicator will disappear.
2.
To stop your study, press the button and the 3, 2, 1 will display as it ends the study.
3.
To download and view your results in DMS, please see Chapter 5.)
Padlock icon
Secure all
Key indicator
Indicates dosimeter is
locked while running.
Summary of Contents for Edge eg5
Page 9: ...viii This page left blank intentionally ...
Page 58: ...49 Appendix A Edge Block Diagram Analog Board ...
Page 59: ...50 Appendix A Edge Block Diagram continued ...
Page 68: ...59 Appendix C Appendix C Measurement equations APPENDIX C ...