![background image](http://html.mh-extra.com/html/3m/edge-eg5/edge-eg5_user-manual_442993021.webp)
Docking station functionality
Docking station components
12
Docking station components
The table below explains the EdgeDock1 or EdgeDock5 LED indicators, power connector, USB
connector, and contact pins.
Table 2-2: EdgeDock1 and EdgeDock5 components
EdgeDock1 or EdgeDock5
The EdgeDock1 and EdgeDock5 are powered by a 12-volt charger adapter.
Figure 2-5 illustrates the assembly of the charger adapter and the plug adapter. It slides into place by
guiding it down the back cavity (opening) of the power supply.
NOTE:
the example is a typical adapter which may be different than the one you are using.
Mechanically, it will function similarly.
Figure 2-5: Attaching the charger adapter with the plug adapter
Docking station
components
Explanation
Charging indicator
Identifies if the dosimeter is “charging” or “fully charged”. A
red blinking
LED indicates the dosimeter is charging. A
solid green
LED equates to a
fully charged dosimeter.
Power indicator
An
amber
LED indicates the docking station is powered on.
Power connector
Attach the power connector cable to the docking station in order to charge
the dosimeter(s).
USB connector
Attach the USB connector to communicate with the dosimeter(s).
Charge Contacts
Placing the dosimeter (s) onto the charge contacts allows charging and
communication.
B. Slide plug adapter into the crevices of base
A. Charger adapter
Summary of Contents for Edge eg5
Page 9: ...viii This page left blank intentionally ...
Page 58: ...49 Appendix A Edge Block Diagram Analog Board ...
Page 59: ...50 Appendix A Edge Block Diagram continued ...
Page 68: ...59 Appendix C Appendix C Measurement equations APPENDIX C ...