![background image](http://html.mh-extra.com/html/3m/edge-eg5/edge-eg5_user-manual_442993041.webp)
Overview of running a study
Resetting the dosimeter
32
Resetting the dosimeter
The Edge can be reset through the dosimeter keypad or via DMS. The steps below outline how to reset
your dosimeter.
Reset
1.
Ensure the meter is
Off
.
2.
Turn the meter on by pressing the
button.
3.
When the splash screen appears, press and
hold
the
and
buttons until the splash
disappears.
Figure 4-5: Splash screen
4.
The
Setup menu
appears on the Edge. Press the
up
or
down
arrow
to select the reset icon
(symbol).
NOTE:
Setup menu is used to reset the dosimeter, change the contrast, and return to the main
view.
Figure 4-6: Resetting the Edge from the keypad
5.
Press and hold the button.
6.
A 3, 2, 1 countdown will appear, and then a shaded bar will appear indicating the dosimeter is being
reset.
7.
Press the down arrow until the checkmark icon is selected (denoted by the arrows). Then, press the
button to return to the measurement view screen.
Edge Splash screen
Arrows and enter key
Indicates the valid keys are
selected
Checkmark icon
Is the selection to exit
the setup menu
Reset icon
eg5
Summary of Contents for Edge eg5
Page 9: ...viii This page left blank intentionally ...
Page 58: ...49 Appendix A Edge Block Diagram Analog Board ...
Page 59: ...50 Appendix A Edge Block Diagram continued ...
Page 68: ...59 Appendix C Appendix C Measurement equations APPENDIX C ...