![background image](http://html.mh-extra.com/html/3m/edge-eg5/edge-eg5_user-manual_442993043.webp)
Running studies
Starting a run
34
Running studies
With a couple pushes on the keypad buttons, you will be running and viewing your study (ies). Following
your study (ies), you can load the data/files into DMS to manipulate, analyze, save, and create reports (See
Chapter 5 for viewing your logged data in DMS).
Starting a run
How to run a noise study
1.
If your dosimeter is turned off, press the button to power on.
2.
Press and hold the button.
A 3, 2, 1 countdown will appear.
3.
When running, the following will appear:
A run indicator will appear on the top-right side.
The LED indicator will flash green (unless you disabled this in DMS.)
Figure 4-8: Display screen while running
Run indicator
Appears when running
Battery indicator
Flashing green LED
indicates running
Measurements
Use up/down arrow
to move through
values.
Views are
customizable via
DMS setup
Summary of Contents for Edge eg5
Page 9: ...viii This page left blank intentionally ...
Page 58: ...49 Appendix A Edge Block Diagram Analog Board ...
Page 59: ...50 Appendix A Edge Block Diagram continued ...
Page 68: ...59 Appendix C Appendix C Measurement equations APPENDIX C ...