3DCPI-02
START-UP GUIDE
2.
Select “Change Speed” as shown below, to change building speed. (NOTE: The
value displayed is a scale factor compared with default speed.) Select “Change
Temperature” as shown below, to change building temperatura.
VI.PyPy Acceleration
In the newest version of ReplicatorG, PyPy is introduced to GCode generation. When
converting a model with the same settings, PyPy is 2-3 times faster than traditional
Python. These two kinds of interpreters have their own advantages. Python has more
stable performance, while PyPy has superior processing speed. The following
paragraphs will show you how to set up PyPy acceleration. Use it or not according to
your needs.
PyPy vs Python Processing Speed
Model(Snake)
Whistle
3D_Knot
Python
1min 29sec
1min 30sec
2min 37sec
PyPy
41sec
45sec
1min 10sec