3DCPI-02
START-UP GUIDE
2.
(ReplicatorG can help leveling buid platform. If leveling is done by SD card,
you can skip this step.) Connect the printer and the computer, and set up
ReplicatorG following user manual. Use the software to open the leveling file
“3DCPI-02GridCalibration.gcode”, and observe the LCD screen of the printer.
3.
Press the center button, and adjust as the LCD screen displays.
4.
After pressing the center button, the print head moves to back left of the build
platform. Observe the limit switch indicador. If the LED lights instantly, it`s at
the right height. Otherwise, adjust the know under the back left of the build
platform until the indicador Light shines.
