3DCPI-02
START-UP GUIDE
II.Setting up your 3DCPI-02
Loading filament
Open the package and take out the filament spool. Fit it onto the right holder on the
back of the machine. Make sure the spool spins clockwise (when viewed from the back
of the machine) when printing, and that the end of the feed tube isn’t lower than the
spool holder, as shown below. Then, push filament through the feed tube into the
extruder.
(As for CubeII with dual extruders, mount the second spool on the left holder and
ensure that it spins counter-clockwise.)