3DCPI-02
START-UP GUIDE
5.
Then press the center button to adjust the back right point.
6.
Repeat step 4 to adjust the know un der the right back of the build platform.
Once the LED lights, press the center button to adjust the front pint.
7.
Repeat step 4 to adjust the know under the front of the build platform, until the
LED lights.
8.
After pressing the center button, the LCD screen requires you to readjust the
three points. Repeat step 4 to 7. Three points just touch the limit switches to turn
on the LEDs, which jeans the build platform is leveled. Press the center button
to finís this process.