3DCPI-02
START-UP GUIDE
e. When the machine is connected successfully, the status bar below toolbar turns green.
Otherwise, red. When the machine is running normally, it turns yellow.
NOTE:
When the machine can¡¯ t be connected, please check:
Power is being supplied to the printer.
Your computer is connected to your 3DCPI-02 with the supplied USB cable.
Driver is installed successfully.
III. Installing software
Setting up 3D data
1. Importing model file into ReplicatorG
The machine supports STL and OBJ model files. You can use 3D design software (such
as Rhinoceros, Solidworks, Sketchup, UG, etc.) to convert file format.
Open file by selecting the "File>Open" menu option.
Here we´ll print a sample. Select “File->Open->3D_Knot.stl” and click “Open”.
Now you'll see the 3D model you've selected as shown below.