3DCPI-02
START-UP GUIDE
2. After the GCode file is saved, pull out the SD card from your computer and insert it
into the USB port on your printer. Select “Build from SD” and choose the file, by up
and down arrow keys beside the LCD panel. Press the center key to enter after selecting.
3. After selecting file and pressing the center key, the printer starts to heat up. The LCD
panel displays as below.
4. If you want to cancel building, please press the left arrow key (i.e. the back button). A
message appears as below.
5. Select “Yes” and press the center key, to stop building. The LCD panel returns to
home screen automatically.