![background image](http://html1.mh-extra.com/html/3d-platform/3dp1000/3dp1000_user-manual_441968005.webp)
www.3DPlatform.com |
3
Original Instructions 2015
Each 3DP1000 3D printer is inspected and calibrated,
prior to shipment, to ensure proper functionality.
• This printer is intended for professional use by an
operator with the ability to read instructions, having
basic/low level knowledge of electronics, mechanics,
and computers in general.
• Intended for printing 3D objects with materials
manufactured for the FFF—fused filament
fabrication—type of 3D printing.
• To be operated with the appropriate size/diameter
filament as specified within this manual.
Safety and Warning Symbols
SAFETY AND WARNING SYMBOLS
Warning Symbol Meaning
Location
Comments
WARNING HOT SURFACE
• Print nozzle
• Print bed
A hot surface is located in the vicinity—do not touch.
CRUSHING OF HANDS
• X axis
• Y axis
• Z axis
When in motion, the 3DP1000's linear actuators that move in
multiple directions at variant speeds may be a pinch hazard
and cause injury.
AUTOMATIC START-UP
• Front of the print bed
The 3DP1000's linear actuators start and stop automatically
depending on the printing operation.
ELECTRICAL HAZARD
• Electrical box
• Digital temperature
controller
Use caution when working with electricity.
EMERGENCY STOP
• Front corner of machine
• Back corner of machine
In case of emergency, use the Emergency Stop buttons on the
machine to turn off power.
On restart, the Emergency Stop must be disengaged—twist and
pull to disengage. Then, press the Reset button prior to restarting
the machine.
RESET
• Front panel of electrical box
The reset button is used prior to restarting the machine after an
Emergency Stop.
ON
• Front panel of electrical box
Turns the machine on.
OFF
• Front panel of electrical box
Turns the machine off.
• To be operated under normal operating conditions
as specified within this manual.
• Not intended to be used by children or persons not
familiar with the operating and safety instructions.
Use by unqualified persons may be dangerous to
the user and/or damaging to the printer. Printer
damage due to mis-use is not covered by the
warranty.
• Any modifications to the 3D printer are at your own
risk and will void the warranty. The manufacturer
cannot be held responsible for modifications made
by other persons.
INTENDED USE