www.3DPlatform.com |
15
Original Instructions 2015
Download BedTempControl-ed330.pdf
Operating the 3DP1000
HEAT THE PRINT BED
The print bed on the
3DP1000
printer is heated to
provide better adhesion of your printed parts. Each
material you use will likely require a different bed
temperature.
• For easy removal of large or small parts, simply turn
your bed temperature down to 20° C. You will hear
the plastic loosening and the part will pop off the
print bed.
• Printers purchased prior to 12-4-15 have the
temperature control unit for the print bed located
on the front of the machine. The print bed control
operates independently.
• Printers purchased after 12-4-15 operate the
temperature of the print bed through the LCD control
unit or with 3D printing software.
Visit
www.3DPlatform.com/support
for detailed
specifications and user instructions for the bed heater
control panel.
See the
Recommended Temperature
table on
page 13.
°
C
Link to bed heater control panel user
instructions
Machines sold after 12-4-15 utilize the software and/or
the LCD Control Unit to heat the print bed.
