manualshive.com logo in svg

3D Platform 3DP1000, User Manual

Share
Download
3D Platform 3DP1000 User Manual Download Page 27

www.3DPlatform.com  |  

25

Original Instructions 2015

ORIENTING THE PART FOR SUCCESS

Part orientation—the direction the part is positioned 
on the print bed—effects the print quality, print time, 
surface finish, and overall print-ability of the model. The 
following tips are intended to assist in orienting your part 
for a successful print.
•  Position so the most surface area is in level contact 

with the print bed.

•  If possible, orient the part to reduce or eliminate 

support structures.

•  Consider surface finish. Which part of the model is 

most important? Position the part accordingly.

•  Reducing support structures will reduce print time.
•  When break-away support structures are used 

directly on the print bed, the use of a raft may be 
necessary to avoid adhesion problems. 

AUTODESK

®

 

3D PART VIEWER

This online tool provides instant viewing of 2D and 3D 
designs—without purchasing software. 

https://360.autodesk.com/Viewer

FINE TUNING THE 0.6 MM NOZZLE

View and download the user guide to fine tuning the 
standard 0.6 mm nozzle.

http://3dpunlimited.com/support/

TYPICAL SOFTWARE 

CONFIGURATION

Use the typical software configuration for initial setup 
with 3D printing software. Access information by  
clicking the link:  

http://3dpunlimited.com/support/

SOFTWARE TUTORIALS

Please visit the following links for Slicer and Simplify 3D 
software tutorials. Note: these tutorials are not produced 
by 3D Platform, but are recommended.
•  Simplify 3D 

https://www.youtube.com/watch?v=D968RL1Z6l4

• Slicer 

https://www.youtube.com/watch?v=o1HPeovBclc 

Printing Tips and Support Documentation

Link to article: Rafts, Skirts, and Brims

Summary of Contents for 3DP1000

































Reviews:

No comments

Brands by name

Popular brands

Load more brands