4
| www.3DPlatform.com
Original Instructions 2015
Technical Specifications
ELECTRICAL
Standard AC Input:
220-250VRMS Print Bed and Printer Control
15ARMS
60Hz or 50Hz
Sold with (1) NEMA L6-15 plug, see typical outlet
diagram below.
Printers sold prior to 12-4-15:
Single Extruder:
120V
RMS
Print Bed, 120V
RMS
Printer
Control, 15A
RMS,
60Hz or 50Hz, sold with (2) NEMA
5-15 plugs, see typical outlet diagram below.
Dual Extruder:
220-250V
RMS
Print Bed, 120V
RMS
Printer Control, 15A
RMS,
60Hz or 50Hz, sold with (1)
NEMA L6-15 plug for print bed and (1) 5-15 plug for
printer control, see outlet diagrams below.
MECHANICAL
Build Platform:
Borosilicate glass, 5 mm thick
XYZ Axes:
Lead screw driven SIMO
®
Series linear
actuators from PBC Linear
®
. Screw max values: 640
RPM, 16000 mm/min, 267 mm/sec.
Stepper Motors:
NEMA 23 stepper motors with
integrated amplifier and 800 micro-stepping (as set at
factory). M/S option up to 25000 available.
Upgrade to Motors with SurePrint
™
Servo
Technology
(Optional)
:
• 85% more motor torque equals faster prints
• Closed loop system improves print quality
• Sophisticated control similar to a car's traction
control and anti-lock brake system
Printer Type:
FFF – Fused Filament Fabrication is a
form of additive manufacturing, commonly used for 3D
modeling, rapid prototyping, and production applications.
Build Area:
1 meter x 1 meter x 0.5 meter
(39.3" x 39.3" x 19.6")
Layer Resolution:
Down to 70 microns (0.0027")
Note: Accuracy is dependent upon nozzle size, slice settings,
geometry, print speed, filament quality, and a range of other
factors. Under average conditions, it is typical to achieve layer
resolutions of 100 microns with a 0.4 mm nozzle and a well-
tuned and calibrated printer configuration.
Filament Diameter:
3 mm
(actual diameter may vary)
For printers sold after 12-4-15, standard extruder model
will accept 3 mm or 1.75 mm filament.
Nozzle Diameter:
Standard Nozzle: 0.6 mm
Other nozzle sizes available from manufacturer.
Note: See important safety guidelines located in the maintenance
section of this manual before changing nozzles.
Connectivity to Laptop:
USB
PHYSICAL DIMENSIONS & WEIGHT
Overall Width:
1.422 meters (56")
Overall Depth:
1.676 meters (66")
Overall Height:
1.524 meters (60")
Approx. System Weight:
400 lbs.
Shipping Crate Dimensions:
1.524 m x 1.828 m (5 ft x 6 ft)
Approx. Shipping Weight:
1200 lbs.
(includes crate)
CONTROLS & FIRMWARE
Standard with the 3DP1000 printer:
• Taurino (AT mega 2560)
• RAMPS 1.4
• Pololu Extruder Stepper Drivers
• Consult factory for Marlin Firmware
source code and/or updates
TEMPERATURES
Maximum Nozzle Temperature: 290°C
Maximum Print Bed Temperature: 120°C
Outlet Diagrams
Image Credit: 'NEMA simplified pins' by Orion Lawlor - Own work. Licensed under CC
BY-SA 3.0 via Wikimedia Commons - http://commons.wikimedia.org/wiki/File:NEMA_
simplified_pins.svg#/media/File:NEMA_simplified_pins.svg
NEMA 5-15
NEMA L6-15
