3Com TRGpro, Handbook

Page: 230 / 260

Page 222 Frequently Asked Questions
Operating problems
Problem Solution
My handheld
computer won’t turn
on. Try each of these in turn:
■
Adjust the contrast control.
■
Make sure the batteries are installed
properly.
■
Replace the batteries. If your handheld
computer still does not operate, try a
soft reset; see Appendix A.
I replaced the
batteries, but I am
still getting a low
battery warning. The battery warning message may appear
immediately after replacing the batteries.
Also, if you check the battery gauge in the
Applications Launcher
immediately after
replacing the batteries, the gauge may start
at “empty” and slowly rise to “full.” This is
normal. It takes a few minutes for the
battery gauge to accurately show the
condition of the batteries.
I get a warning
message telling me
my handheld
computer memory is
full.
■
Purge Date Book and To Do List. This
deletes To Do List items and past Date
Book events from the memory of your
handheld computer. See “Purging
records” in Chapter 4. You may need to
perform a HotSync
®
operation to
recover the memory.
■
Delete unused memos and records. If
necessary, you can save these records.
See “Deleting records” in Chapter 4.
■
If you have installed additional
applications on your handheld
computer, remove them to recover
memory. See “Removing applications”
in Chapter 3.