5-22
C
H
A
P
T
E
R
5:
A
D
D
I
T
I
O
N
A
L
M
A
N
A
G
E
M
E
N
T
U
S
I
N
G
VT100
information through a variety of services. This
appendix describes these services.” on page C-1
.
The software download can be performed through a
serial connection (over SLIP) but it is much faster over
the network.
File Name
Enter the name of the file that contains
the software image to be downloaded to the hub.
You must place the image file where it is accessible
to the TFTP load request. Check with your supplier if
you are unsure where to place the image file.
You may wish to download the file from another
directory. If so, you must give the full path to the file
and the filename, using a maximum of 30 characters.
Server Address
Enter the IP or IPX address of the
device where the software file containing the image
of the management facility can be found.
OK
Select this button to start the software download.
When the download is complete, the hub is reset.
If the software download fails, any traps that are sent
to an IP/IPX-based network manager, reporting the
failure, may indicate an incorrect status. This is not a
concern for a successful download as it always result
in a correct trap status.
16710.bk : MANVT100.FRM Page 22 Tuesday, October 7, 1997 11:38 AM
