4-8
C
H
A
P
T
E
R
4:
M
A
N
A
G
I
N
G
Y
O
U
R
H
U
B
U
S
I
N
G
Q
U
I
C
K
C
O
N
F
I
G
M
A
N
A
G
E
R
To display the IP Setup dialog box and view or
configure the hub’s address settings:
1
From the
Configure
menu, select
IP Setup
...
Quick Config Manager
d
isplays
either
the
IP Setup
d
ialog box
or the Easy Setup Option, as shown in
Figure 4-3
, depending on what IP information is
currently configured for the hub:
■
If an IP address has been configured for the hub,
and it is not 0.0.0.0, the IP Setup dialog box is
displayed. If you have previously configured
address information for the hub but want to go
through the Easy Set-Up option again, you can
start it by clicking on the
Easy Set-Up
button.
■
If no previous IP information has been
configured for the hub or the IP address is
configured as 0.0.0.0, and the Enable IP box is
checked, the Easy Setup option is started. If you
want to enter information directly into the IP
Setup screen or abort the Easy Setup process,
select
Abort
.
The Easy Setup option asks you if you want to
manually configure the hub for IP. If you have a
BOOTP server (that automatically allocates IP
addresses) select
No
, otherwise select
Yes
.
Figure 4-3
IP Setup D
ialog Box And Easy Setup Option
16710.bk : MANAGING.FRM Page 8 Tuesday, October 7, 1997 11:38 AM
