4-32
C
H
A
P
T
E
R
4:
M
A
N
A
G
I
N
G
Y
O
U
R
H
U
B
U
S
I
N
G
Q
U
I
C
K
C
O
N
F
I
G
M
A
N
A
G
E
R
Figure 4-13
Security Configuration Panel
Quick Config Manager displays the Security
Configuration
panel
, as shown in
Figure 4-13
.
3
Configure the security features for each port.
4
Click on
OK
when the security setup is complete
.
In the Security Configuration panel at hub level:
■
Available
— This lists the hub’s ports, identifying
them by port number and media type. Click on
a port to select it from the list or perform a
multiple selection.
■
Selected
— Shows the ports selected to be
configured. Click on a port to select it from the
list or perform a
multiple selection.
■
Select>
—
A
dds the selected ports in the
Available list to the Selected list.
■
<Remove
—
R
emoves the selected ports from
the Selected list to the Available list.
■
All>>
— Adds all the available ports to the
Selected list.
■
<<All
— Removes all the selected ports from the
Selected list.
DUD
and
Need To Know
are the same as for port
level, see
“Configuring Security at Port Level” on
page 4-29
.
16710.bk : MANAGING.FRM Page 32 Tuesday, October 7, 1997 11:38 AM
