Troubleshooting
6-10
Setting Up an Echo Server
If your echo server contains the 3C529 or 3C529-TP
adapter, select the Echo Server menu item under the Test
menu, and select the <Start> command button to make
the computer an echo server.
If you are setting up an echo server using a 3Com adapter
other than the 3C529 or 3C529-TP adapter, follow
these steps.
1. Select a computer to use as an echo server.
Make sure that the computer is connected to an
inactive network.
2. Insert the EtherDisk diskette containing the 3Com
adapter diagnostic program in a floppy drive.
3. Start the diagnostic program on the echo server.
The diagnostic program that you use depends upon
the adapter board that is installed in the echo server.
Enter 3CXXX, selecting the appropriate program
from the following list:
Diagnostic
Program
Adapter
3C503
EtherLink II
®
or II TP,
EtherLink II/16 or II/16 TP
3C505
EtherLink Plus
®
3C507
EtherLink 16 or EtherLink 16 TP
3C5X9CFG
All EtherLink III adapters
3C523
EtherLink/MC
3C523TP
EtherLink/MC TP
3C527
EtherLink/MC 32
