Quick Start
2
4. Check the adapter for any visible signs of damage.
If you find a problem, immediately notify your network
supplier and the carrier that delivered the adapter.
5. Place the adapter back in its antistatic bag until
you are ready to install it.
NOTE: Fill out the Product Registration Card at the
back of this manual and return it to 3Com. Or call
1-800-NET-3Com for immediate registration.
Installing the Adapter
WARNING: The adapter board will be installed in a
computer which operates with voltages that can be
lethal. Before you remove the cover of your computer,
you must observe the following steps to protect yourself
and prevent damage to the system’s components.
1. Turn off the computer and unplug the unit from
its power source.
2. Disconnect all cables that are connected to the
main system unit.
3. Remove any jewelry from your hands and wrists.
4. Use only insulated or nonconductive tools.
5. Remove the computer’s cover and choose an
expansion slot (see Figure 1-1).
