3Com 3CRWX120695A, Reference Manual, Page: 390 / 570

390 C
HAPTER
8: M
ANAGING
WX S
YSTEM
I
MAGES AND
C
ONFIGURATIONS
3 To enable the detection of configuration changes in the network, make
sure
Poll Config is selected.
To disable automatic detection, clear Poll Config . By default, this option
is enabled.
4 To specify how often network checks occur, specify the interval between
checks, from 1 to 1440 minutes (24 hours), in the Interval box. The
default is 15 minutes.
5 To be notified of network changes by a popup message, select Prompt
when network changes are detected .
To disable the popup message, deselect the option.
Disabling the popup message does not affect the Network Changes
information in the Alerts panel. The Alerts panel still notifies you of
network changes.
6 Click Close to save the changes and close the dialog box.
Deploying WX
switches from a
Network Plan to
the Network
To deploy the WX switches configured in a network plan, select
Changes > Deploy from the toolbar in the main 3WXM window. The
Deploy Configurations dialog box is displayed.