3Com 3CRWX120695A, Reference Manual, Page: 297 / 570

Connecting to RADIUS Servers and Server Groups 297
5 In the Name box, type the name of an existing RADIUS server (1 to 32
alphanumeric characters, with no spaces or tabs). Do not use the same
name for a RADIUS server and a RADIUS server group.
6 In the IP Address box, type the IP address for the RADIUS server, in dotted
decimal notation.
7 In the Timeout box, specify how long (1 to 65,535 seconds) the WX
switch must wait for a RADIUS server to respond before retransmitting.
The default is 5 seconds.
8 In the Authentication Port box, specify the UDP destination port to which
the WX switch listens for authentication and authorization. The default
port is 1812.
9 In the Accounting Port box, specify the UDP destination port to which the
WX switch listens for accounting. The default port is 1813.
10 In the Retry Count box, specify how many retransmissions (1 to 100) are
sent for a RADIUS request. The default is 2.
11 In the Dead Time box, specify how long (0 to 1440 minutes) the WX
switch waits before attempting to reach an unresponsive RADIUS server.
The default is 0 minutes.
12 In the Key box, type the password (also known as a shared secret key)
used to authenticate to the RADIUS server (1 to 32 characters long, with
no spaces or tabs).