3Com 3CRWX120695A, Reference Manual

Page: 322 / 570

322 C
HAPTER
7: C
ONFIGURING
A
UTHENTICATION
, A
UTHORIZATION
,
AND
A
CCOUNTING
P
ARAMETERS
To add a server group, click Create and go to “To define a RADIUS server
group” on page 298. After you create the server group, click Choose
Available and then select the server group from the list.
4 Do one of the following:
■
To configure accounting, go to “To set the accounting method for
administrator access”.
■
To save changes and close the wizard, click Finish .
To set the accounting method for administrator access
1 Click Accounting at the top of the wizard to display the following page.
2 To enable this accounting rule, select Enabled . By default, a rule you
configure in 3WXM is disabled, which means 3WXM does not add the
rule to a WX switch’s configuration.
3 Select one of the following record options:
■
Select Start-Stop to specify that records are sent at the start of a
session and the end of a session.
■
Select Stop-Only to specify that records are sent only at the end of a
session.
4 To select the accounting method, click Choose Available , then select the
method from the list: