360 Vision Predator-DV Installation And Configuration Manual Download Page 56

Page: 56 / 66

Page 56

Predator Radar Installation Manual V2.1.18.1

•

Date Format - Select from the drop down the date format.

•

Time Format - Choose 24hr or 12hr time display.

•

Date Position - Choose date text to bottom right or left of the image.

•

Time Position - Choose time text to bottom right or left of the image.

(See Video - Stream Tabs - page 47).

NTP Calibration

This is used to calibrate the codec clock to a SNTP server so that the codec time is more accurate.

•

Start - Click on this option to start the process. Synchronize with SNTP Server option must be

selected with access to the SNTP server. The process takes approx 20 minutes.

•

Refresh - Use this option to manually refresh the web page to show how much of the process has

been done, or if it is complete.

to apply the new settings into the Predator-HD.

Cancel

to abandon the changes to the date/time settings.

21.8 Network

• Camera - Cannot be edited, shows label/name given to the camera.

(See Video - Camera - page 47).

The Network tab, offers options to:-

• DHCP Enable - Allows the camera to be set using a dynamic IP address.

• IP Address - Input a static IP address, if DHCP is not used.

• Netmask - Input the Network Subnet Mask.

• Default Gateway - Input the Network Gateway.

• Primary Name Server - Input the Domain name server, if required.

•

MTU Size - Option to change the MTU size, default is 1500 bytes.

Only available on Multimedia Edge Recording Predator

The FTP tab, offers options to configure a link to an FTP server:-

• FTP Server - Input FTP server IP address, domain name.

• Port - Set port to be used for FTP access, default is 21.

• User Name - FTP server username.

• Password - FTP server password.

•

File Upload Path - Set folder name for the file transfer on FTP server.

Summary of Contents for Predator-DV



































































Search results

Summary of Contents for Predator-DV

Reviews:

Related manuals for Predator-DV

Brands by name

Popular brands

360 Vision Predator-DV, Installation And Configuration Manual

Search results

Summary of Contents for Predator-DV

Reviews:

Related manuals for Predator-DV

Brands by name

Popular brands