360 Vision Predator-DV Installation And Configuration Manual Download Page 37

Page: 37 / 66

Page 37

Predator Radar Installation Manual V2.1.18.1

17.1.5 Camera Height

This is the height of the camera above the ground in metres. This needs to be reasonable accurate to ensure

the camera alignment is good when its following targets. By default, this is 4m which is the optimum mounting

height for the radar.

17.1.6 Speed

These are the units in which you want to display speed on the On Screen Display (OSD)

for the target being followed.

17.1.7 Link Reset

This button will force a communication link reset between the radar and the camera. This must be used when

the camera IP address is updated but it can also be used when troubleshooting if required.

18 Security Certificates

The Predator Radar configuration interface is accessed over a secure HTTP link (using SSL). In order for this to

be secure your browser and the radar have to exchange certificates. Because this certificate has been supplied

by the radar manufacturer it is not recognised by your browser. This leads to security warnings, like these:

Summary of Contents for Predator-DV



































































Search results

Summary of Contents for Predator-DV

Reviews:

Related manuals for Predator-DV

Brands by name

Popular brands

360 Vision Predator-DV, Installation And Configuration Manual

Search results

Summary of Contents for Predator-DV

Reviews:

Related manuals for Predator-DV

Brands by name

Popular brands