Table of Programmable Parameters
71
Save button
Push this button to save the new settings.
Default button
Push this button to restore the default values (factory settings).
VRRP
VRRP (Virtual Router Redundancy Protocol) is a protocol increasing the availability
of the default gateway, which provides the user service in a certain network
segment. For a correct function, there must be two servers at least in the
segment – one master and one backup.
Enable
Enable/disable the use of the VRRP in 2N
®
EasyRoute.
Setting options:
ON/OFF
Default setting:
OFF
Virtual IP
Set the IP address of the virtual server. One and the same address should be set
here for all the devices that are to work as servers.
Setting options:
Valid IP address
Default setting:
Empty
ID
Set the gateway ID to be displayed as server identification in the given network
segment. Each server should have a unique ID.
Setting options:
1-255
Setting step:
1
Default setting:
1
Priority
Set the server priority. A higher number means a higher priority. The device with
priority 255 must be available in the network and is regarded as the master. The
other priority numbers need not be assigned sequentially. Priorities should not be
multiplied in the given network segment.
Setting options:
1-255
Setting step:
1
Default setting:
255
Enable pre-emptive mode
Enable/disable return to the master upon its recovery.
Setting options:
ON/OFF
Default setting:
OFF
