2N EasyRoute User Manual Download

Page: 29 / 102

Table of Programmable Parameters

is moved to the storage of deleted SMS and, together with the other SMS

messages, deleted automatically when the assigned data space is filled up.

Errors

The

Errors

section displays the SMS messages that failed to be sent. The menu

helps you read the messages including such details as the SMS addressee. To

delete a message, select it and push the

Delete

button. To move between the

pages use the page numbers in the upper part of the screen.

Menu Buttons

Select all

Push this button to select all SMS on the page. It is available in all SMS menus

except for the

Create

menu.

Delete

Push this button to delete the selected SMS. It is available in all SMS menus

except for the

Create

menu.

SETUP Menu > Wireless

SIM

ICCID

Unique serial numbers of the mobile providers’ SIM cards. There are no identical

numbers at the same time. They start with 8942 for the Czech Republic and have

19 positions altogether.

IMSI

The IMSI (International Mobile Subscriber Identity) is a unique worldwide

identifier of the SIM card inserted.

Type

Type of the SIM card inserted.

SIM
USIM
Unknown

EasyRoute cannot identify the inserted SIM card.

Status

Status of the SIM card inserted. Some statuses are rather rare and so the most

important SIM card statuses are mentioned only.

Unknown

SIM card is not available.

No PIN required

SIM card does not request PIN.

SIM PIN

SIM card is PIN-secured; enter the PIN.

SIM PUK

SIM card has been blocked by entering an invalid PIN;

enter the PUK for unblocking.

Summary of Contents for EasyRoute







































































































Search results

Summary of Contents for EasyRoute

Reviews:

Related manuals for EasyRoute

Brands by name

Popular brands

2N EasyRoute, User Manual

Search results

Summary of Contents for EasyRoute

Reviews:

Related manuals for EasyRoute

Brands by name

Popular brands