Table of Programmable Parameters
54
Add
Use the
Add
parameter to enable automatic call forwarding. Define a string
(prefix) to be added to the beginning of the number to be dialled.
Setting options:
0–8 characters (0–9, *, #, +)
Default setting:
Empty
Extra
Set the pseudo tariff metering rules independent of call duration. Set a fixed count
of tariff pulses to be added to the pulses sent according to the call duration and
the
Tariff rate
setting after the call start. This parameter helps set the minimum
call cost.
Setting options:
0–255
Setting step:
1
Default setting:
0
Tariff rate
Set the pseudo tariff-metering rules based on call duration. Define how often (in
seconds) you want to transmit tariff pulses. A lower number means a more
expensive call. ‘0’ means no tariff pulse metering according to call duration.
Setting options:
0–255 s
Setting step:
1 s
Default setting:
0 s
VoIP
ERF
The checkbox is available in the FAX version only and helps route numbers
corresponding to the table row to the VoIP network.
Setting options:
Enabled/Disabled
Default setting:
Disabled
Routing mode
The lower screen menu helps you set the mode of the routing table use.
Setting options:
GSM:
2N
®
EasyRoute routes all calls to the GSM network regardless of the
routing table settings.
VOIP:
Available in the FAX version only. 2N
®
EasyRoute routes all calls to
the VoIP network regardless of the routing table settings.
According to table: 2N
®
EasyRoute routes all calls to the GSM or VoIP network
according to the routing table settings.
Default setting: According to table
Save button
Push this button to save the new settings.
