Table of Programmable Parameters
72
Enable authentication
Enable/disable the use of another device-specifying parameter within the VRRP
network. Authentication is a sort of safety lock against unintentional misuse of
devices with identical IDs rather than a password or unauthorised access
prevention.
Setting options:
ON/OFF
Default setting:
OFF
Password
Enter the VRRP device password. It is included in every VRRP packet transmitted
by the device.
Setting options:
1-8 alphanumeric characters
Default setting:
Empty
Reporting interval
Set the interval for sending state notifications to IP address 224.0.0.18.
Setting options:
1-50 s
Setting step:
1 s
Default setting:
1 s
Save button
Push this button to save the new settings.
Default button
Push this button to restore the default values (factory settings).
SNTP
SNTP (Simple Network Time Protocol) provides time synchronisation with the
selected server. A client supporting the SNTP only cannot be a server for other
clients.
Enable
Enable/disable the use of the NTP server as defined below.
Setting options:
ON/OFF
Default setting:
OFF
NTP server name
Enter the NTP server domain name or IP address.
Setting options:
NTP server address
Default setting:
Empty
Update interval
Enter the synchronisation interval for the selected NTP server.
Setting options:
5-43,200 min
Setting step:
1 min
Default setting:
60 min
