2N EasyRoute User Manual Download

Page: 13 / 102

Before You Start

2.2 Before You Start

Product Completeness Check

Please check the product for completeness before installation. The package should

include the following pieces:

1 2N

EasyRoute

1 GSM+UMTS antenna

1 supply adapter

1 telephone cable

1 network cable (Fast Ethernet RJ45)

Quick start manual

CD containing User Manual and other information

Installation Requirements

EasyRoute is designed for vertical mounting on suspension holes (use the

included template for wall drilling). This position is the best for signal

reception because a vertical antenna is used. 2N

EasyRoute can be operated

in the horizontal position too where the GSM signal is good.

Install 2N

EasyRoute with respect to the GSM signal strength – check the

signal strength using the 2N

EasyRoute web interface.

Place 2N

EasyRoute out of range of sensitive devices and human bodies to

minimize electromagnetic interference.

For the allowed range of operating temperatures refer to the Technical

Parameters chapter.

It is impossible to operate 2N

EasyRoute on sites exposed to direct solar

radiation or near heat sources.

EasyRoute is designed for indoor use. It may not be exposed to rain,

flowing water, condensed moisture, fog, etc.

EasyRoute may not be exposed to aggressive gas, acid vapours,

solvents, etc.

EasyRoute is not designed for environments with high vibrations such as

means of transport, machine rooms, etc.

Caution

Make sure that you are provided with all necessary technical devices – SIM

with UMTS data connection support, an analogue telephone set or a PBX

with a free external analogue interface (FXO), a PC, or a fax machine (for

ERF).

Summary of Contents for EasyRoute







































































































Search results

Summary of Contents for EasyRoute

Reviews:

Related manuals for EasyRoute

Brands by name

Popular brands

2N EasyRoute, User Manual

Search results

Summary of Contents for EasyRoute

Reviews:

Related manuals for EasyRoute

Brands by name

Popular brands