Table of Programmable Parameters
67
Target
Define the target destination to which packets routed to specified ports are
forwarded. Obligatorily, the destination includes the IP address and the port.
Setting options:
Valid IP address and port
Default setting:
Empty
Enable
Enable/disable port forwarding as defined in the table above the parameter.
Setting options:
ON/OFF
Default setting:
OFF
Delete button
Push this button to remove the selected records.
Save button
Push this button to save the new settings.
Firewall > Port Filter
Used for restricting the gateway access in the LAN > WAN direction. If the
Firewall
is active and the
Port filter
is enabled in this menu, the access through
the gateway is possible via selected ports only.
Protocol
Specify the protocol type for the packet to be filtered.
Setting options:
TCP
UDP
Both
Default setting:
TCP
Port (Service)
Define the port to be used for the internal network – Internet communication. If
the selected port is associated with a service, the service is given in the
parentheses behind the port number, e.g. 23 (Telnet).
Setting options:
0-65,535
Default setting:
Empty
Enable
Enable/disable port filtering according to the rules defined above the parameter.
Setting options:
ON/OFF
Default setting:
OFF
Delete button
Push this button to remove the selected records.
Save button
Push this button to save the new settings.
