2N EasyRoute User Manual Download Page 22

Page: 22 / 102

Table of Programmable Parameters

FUP limit

Counter capacity according to FUP parameters.

Disabled

FUP not allowed.

0 – 100%

Counter filling percentage; 100% results in Internet

disconnection.

Sent

Shows the total count of packets and (bytes) sent to the mobile network.

Received

Shows the total count of packets and (bytes) received from the mobile network.

SMS

Received / Sent

Count of SMS currently available in the received/sent SMS storage.

Total

Total count of SMS in the gateway, including the storages of received/sent SMS

and user-deleted SMS. The value in parentheses shows the current data space

occupied by SMS in the gateway, including the storages of received/sent SMS and

user-deleted SMS. If the value reaches the defined limit, all user-deleted

messages are removed and the free space is used for new incoming and outgoing

SMS.

Others

WLAN

Gateway WiFi network state.

Disabled

WiFi network is deactivated.

Enabled

WiFi network is activated.

WAN

Gateway WAN port state.

Disabled

WAN port is deactivated.

Enabled

WAN port is activated.

HotSpot

Current HotSpot state.

Disabled

HotSpot is deactivated.

Enabled

HotSpot is activated.

Summary of Contents for EasyRoute







































































































Search results

Summary of Contents for EasyRoute

Reviews:

Brands by name

Popular brands

2N EasyRoute, User Manual

Search results

Summary of Contents for EasyRoute

Reviews:

Brands by name

Popular brands