2N EasyRoute User Manual Download

Page: 78 / 102

Table of Programmable Parameters

Apply button

Push this button to save the new settings.

Firmware

Module

Information on the module version and date of issue.

Bootloader

Information on the bootloader version and date of issue.

Firmware 0/1

Information on the firmware version, date of issue and downloading instance

number (behind the ‘#’ symbol). An

Active

note is added to one of the firmware

instances to indicate the currently used one. The new firmware is stored

automatically, replacing the preceding one, and becomes active after restart.

Thus, whenever restarted, the gateway operates with the firmware version with

the highest serial number.

Choose…

Push this button to choose the path to firmware for updating.

Automatic reboot

Enable/disable the automatic gateway restart after firmware downloading.

Setting options:

ON/OFF

Default setting:

Update button

Push this button to update the gateway firmware.

Time

Remember to set the SNTP server to make the system time work properly. If the

SNTP server is unavailable, system time is obtained from the GSM / UMTS

provider’s module.

Time zone

Set the time zone according to the UTC standard and/or a shift with respect to

GMT 0.

Daylight saving time

Set whether the daylight saving (summer) time should be respected in the system

time and specify the count of hours for the shift.

Used

– displayed in the daylight saving time mode.

Setting options:

OFF

+1 hour

+2 hours

Summary of Contents for EasyRoute







































































































Search results

Summary of Contents for EasyRoute

Reviews:

Related manuals for EasyRoute

Brands by name

Popular brands

2N EasyRoute, User Manual

Search results

Summary of Contents for EasyRoute

Reviews:

Related manuals for EasyRoute

Brands by name

Popular brands