46
**Some GSM network (SIM cards) not support activation CLIR via GM22 GSM modules, in
status window you will see Network: clirr-err.
Number of called minutes –
Time call limit for one month for the SIM card.
Number of SMS messages
– Number of SMS messages sent via the SIM card / one month.
Day of restore limits –
Day, when counters “time call limit” and “SMS” will be reset to zero (1 to
31).
First count –
length of first count. After this timeout BLUESTAR uses parameter “next count” to
calculate the length of the call. (1 to 250 seconds).
Next count –
length of next counts (1 to 250 seconds) .
Next count –
length of next counts (1
to 250 seconds) .
Parameters First count and Next count are used for calculating of the real length of the call from the
view of GSM operator.
Example 1: If your calls are charged second by second set both parameters to 1.
Example 2: If you are charged immediately after answering a call for the whole first minute and then
second by second set first count to 60 and next count to 1.
Proper setting of these parameters helps you to keep real record of the minutes spent and
charged for each SIM. These parameters are used for limit counters, statistics (not for the
CDR).
Time of use SIM –
Interval of using selected SIM card. Caution!: If parameter “Time of use will
be overlapped by another SIM (in one GSM group) – in this case can come about unspecified
switching of SIM cards – can be selected another SIM cards !
Unlock on weekends
– Permission/prohibition of this group during weekends (Saturday,
Sunday)
Interval of change SIM card –
in this interval hours:minutes will be randomly switched SIM
card. (SIM card will be switched after proceeding call hang-up).
9.5.4.4 GSM Incomming groups
Settings for incomming calls from GSM networks to PRI ISDN interface.
Incoming calls to ISDN –
setting of the method how BLUESTAR will processes incoming calls
from GSM network and route to PRI ISDN interface.
Mode –
mode, how BLUESTAR is answering to incoming calls from GSM network.
- Reject incoming calls -
by selecting this item you barring GSM incoming calls (the calling
subscriber gets the busy tone*).
- Ignore incoming calls –
by selecting this item you ignore GSM incoming calls (but -the calling
subscriber gets the ringing tone).
- Receive incoming calls + voice message –
incoming calls will be routed to ISDN interface
according to following parameters.
