51
10.4. Set-up Accounter program
By starting BLUESTAR Accounter program click on icon
for setting of the program. Here you
have options set in individual flags:
Starts –
setting of individual times, when the program will automatically save cdr info
from BLUESTAR + selection of the method of
saving in the files.
−
A Time
: 1 time of automatic saving
−
B Time
: 2. time of automatic saving
−
C Time
: 3. time of automatic saving
−
Repeatedly
: Will automatically save
cdr each xx minutes (if set for 0, this
method is off)
−
At start program
: Automatic save of
cdr by start of the program
−
Only one file
: If marked, program
saves cdr info in one file
(Dddmmyy.cdr), if not marked , he
differentiate following the method of
saving (1 time – file
DddmmyyABSx.cdr, 2 time –file
DddmmyyB.cdr,3 time – file
DddmmyyCBSX.cdr, Repeatedly –
DddmmyyBSx.cdr, At start- file
DddmmyyABSx.cdr)
−
Use
: Activation of this flag
List –
number of lines that will be represent in the status window.
Login –
Log in name, password.
−
Name
: Log in name in the BS
−
Password :
Log in password in the BS
−
Save pass :
Saving of the log in password foe next start of the program
−
Login attempts :
Number of trials of the program by automatic log in.
Make sure
that user’s password and name are identical with n and p which
are saved in connecting BLUESTAR. By invalid n or p the program will ask
for valid characteristics.
TCP/IP –
Parameters for connecting of the program to the BS
−
IP :
IP address of connecting BS (enter in the right form ! e.g:192.168.50.2)
−
Host :
Network name connecting BS (available in higher versions of the
firmware - for the present time do not fill out please)
−
Port :
Number of the remote data port for communication via TELNET
(standard 23).
−
Service :
Title of the protocol – DO NOT FILL OUT !
