57
LCR
AT&R
Table of LCR
AT%R##=net,hh:mm/hh:mm/w*
,gr
Settings of line ## (0..63) of LCR table
net – number of Network list (0..8)
hh:mm/hh:mm/w* – time limitation for use this line
gr – GSM group numbers
Commands for Testing via AUX
AT!SPxx=dial
Initiates testing call from AUX interface (xx is the called interface):
1..15, 17-31 B-channel
32-rotaring B-channel
AT!SGxx=dial
Initiates testing call from AUX interface (xx is the called interface):
00..31 GSM module
32- to GSM via GSM module according to call prefix
AT!WPxx
Connects the following call from interface xx to interface AUX.
1..15, 17-31 from B-channel no.
32 first incoming call from ISDN
AT!WGxx
Connects the following call from interface xx to interface AUX.
00..31 from GSM no.
32 first incoming call from GSM
AT!D
Terminates call on AUX interface
Commands for Tracing*
AT!RE
Start tracing of error messages active interface.
AT!Lx
Start tracing of LAN & Telnet on layer x
x=2 – Layers IP,TCP,Telnet
x=3 – Layers TCP, Telnet
x=4 – Layer Telnet
AT!Rx
Start tracing of ISDN PRI & GSM on layer x
x=1 – Layers 1,2,3,4
x=2 – Layers 2,3,4
x=3 – Layers 3,4
x=4 – Layer 4
AT!RR
Start tracing (AT!R2) to COM1 interface
AT!RX
Stop tracing (AT!R2) to COM1 interface
* Tracing can run only via one port !!
Commands for sending and receiving SMS messages
AT!G=A6
Start low-level controling for SMS messages (can run only
on one port)
AT!G=55
Stop low-level controling on used port
Controlling SMS messges
AT^SX=ch
…(sms listing) request to list of all SMS messages and
status confirmations saved on SIM card. Possible
answers:: *smserr (busy,list) or *smsinc (ix=1..255) for
each saved SMS or status SMS , end of list or empty SIM
card - *smsinc (ix=0).
AT^SR=ch,ix
…(sms read) request to read SMS message or SMS
status saved on SIM card. Possible answers: *smserr
(busy,read) or *smspdu
AT^SD=ch,ix
…(sms delete) request to delete SMS message (or SMS
