9
•
remote control by an analog or ISDN modem connected to a defined RS232
interface. Automatic ATEUS - BLUESTAR detection and configuration capacities
make the modem perfectly available.
•
remotely via a 10baseT IP interface, using a simple Telnet protocol;
•
remotely by the ATEUS - RCU* via a 10/100baseT using SSH, SNMP, HTTP,
HTTPS protocols;
•
remotely by the in-band B channel in the PRI-ISDN interface**.
No SW is necessary for configuration - the ATEUS - BLUESTAR communicates through
an RS232 interface and Telnet protocol using standard AT commands. However, high-quality
software running under the Windows OS has been designed for user-friendly control and
configuration.
Fault diagnostics is very simple too – the ATEUS - BLUESTAR informs of a fault both
visually (by LEDs) and via any interface. A direct display of all processes on ISDN or IP layers is
a matter of course too.
Quality control –
you can check the quality of ATEUS - BLUESTAR calls any time by test
calls (an analog headset connector is available for test calling into GSM networks or ISDN
interface) or by-hearing of one of the two current call directions.
Quick and easy update –
since the ATEUS - BLUESTAR is not bound to any operating
system, any firmware updating is quick and comfortable and is made by the available software.
Updating can be performed locally or remotely and the process is protected against
unintentional disconnection. The updating process takes a few minutes and the existing
configuration is retained.
* the ATEUS- RCU is not included
** optional part
