36
•
Reset –
resets the gateway and initializes all BLUESTAR boards (the gateway
communication is not discontinued but all current calls and SMS to be sent are terminated!).
•
Factory reset –
resets the gateway, selecting the factory settings for the BLUESTAR . The
gateway communication is not discontinued upon this command.
•
Upload
firmware
– uploads the firmware into the gateway.
FIRMWARE uploading procedure:
−−−−
Prepare the firmware-containing file into a folder selected by you (
Pxxxx-V-xx.xx.xx.bin).
−−−−
Select "Upload firmware" and open this file.
−−−−
The program now automatically uploads your new firmware – the gateways is reset
during this procedure (thus discontinues all current calls and SMS). Do not interrupt the
program during this procedure to avoid errors in firmware uploading – otherwise the
gateway might stop working!
If the procedure of uploading firmware was terminated, please reset the gateway and re-load
the BLUESTAR program and try to upload firmware again.
CAUTION!:
Be sure to use original and undamaged firmware files for the firmware upload to
avoid gateway function problems! For the latest firmware version see our websites
(
www.2n.cz
).
•
Time and date –
sets time and date in the gateway.
•
Change username and password –
sets username and password for access to
BLUESTAR via TELNET.
•
Set keylock –
input for unlock key (see 8.1 page 24)
•
Download trace –
saves the gateway operation and error records on the disk.
•
Save call data –
saves records on calls on the disk (the records will remain in the
BLUESTAR ),
•
Save call data and delete –
saves records on calls on the disk and clears the call memory.
•
Voice message –
Used for loading / clearing of introductory messages when the incoming
DTMF function is activated. The analog AUX input has to be used for loading.
•
Test calls –
testing calls with help of analog AUX interface.
