83
NOTE!
Automatic mapping (Auto) is recommended. Ports will conflict if not
configured properly.
For an NVR with multiple NICs, port mapping should be configured
based on the NIC specified as the default route.
3.
Click
Refresh
and check that
Active
is displayed
for these ports
under
UPnP
Status
.
4.
Click
Apply
to save the settings.
Manual Port Mapping
If your router does not support UPnP, then you need to configure
internal and external ports manually.
NOTE!
The principle of port mapping is that the internal and external ports
of the NVR are consistent with that of the router.
Some routers may require the same internal and external ports for
the NVR and the router.
1.
Click
System
>
Network
>
Port Mapping
.
2.
Select
Manual
for
Mapping Mode
, and then set external ports
manually.
