2M Technology 2MN-9004-P User Manual Download Page 29

Page: 29 / 131

NOTE!



under

Status

means an IP device is added successfully, and you

may click to view live video from the IP device. means the IP
device is offline, and you may view the cause by resting the mouse
pointer on the .



The idle bandwidth is displayed to indicate current bandwidth
available for receiving streams. For more details, see

Network

Statistics

(Optional) To search a specified network segment, click

Search

and

then set the address range.

Click for the IP device to add. Or, you may also



Click

One-click Add

to add all the discovered IP devices allowed

(depending on channels supported by the NVR).



Click

Custom Add

. In the window displayed, enter the IP address

and complete other settings, and then click

Add

. You may also click

Search

and add discovered cameras in the list.

Summary of Contents for 2MN-9004-P




































































































































Search results

Summary of Contents for 2MN-9004-P

Reviews:

Related manuals for 2MN-9004-P

Brands by name

Popular brands

2M Technology 2MN-9004-P, User Manual

Search results

Summary of Contents for 2MN-9004-P

Reviews:

Related manuals for 2MN-9004-P

Brands by name

Popular brands