2M Technology 2MN-9004-P User Manual Download Page 50

Page: 50 / 131

Parameter

Description

I Frame Range

Range of I frames. Currently the range is fixed.

Smoothing

Use the slider to control the sudden increase of bit
rate.

Audio Stream

Enable or disable audio stream.

U-Code

The advanced mode achieves higher compression
ratios.

(Optional) Click

Copy

to apply some current settings such as bit

rate and frame rate to other cameras.

Click

Apply

to save the settings.

Snapshot

Set resolution, image quality and snapshot interval for snapshots taken

according to schedule or triggered by an event.

Click

Camera

Snapshot

Set the parameters as needed.

NOTE!



Scheduled snapshot uses the Normal type of schedule. Event-
triggered snapshot is triggered by an event such as an alarm input
and a motion detection alarm. Settings effective to event-triggered
snapshot also apply to manual snapshot.



Snapshot interval is the length of time between two snapshots.

Click

Apply

to save the settings.

Summary of Contents for 2MN-9004-P




































































































































Search results

Summary of Contents for 2MN-9004-P

Reviews:

Related manuals for 2MN-9004-P

Brands by name

Popular brands

2M Technology 2MN-9004-P, User Manual

Search results

Summary of Contents for 2MN-9004-P

Reviews:

Related manuals for 2MN-9004-P

Brands by name

Popular brands