2M Technology 2MN-9004-P User Manual Download Page 102

Page: 102 / 131

evaluation results include

Healthy

Failure

, and

Bad Sectors

. It is

recommended to replace the disk immediately if the status is

Failure

NOTE!



Some hard disks only support some of the test items.



The  system  provides  three  test  types:  Short,  Extended,  and
Conveyance.  Extended  tests  detect  more  thoroughly  and  thus  take
longer  time  than  Short  tests.  Conveyance  tests  mainly  detect  data
transmission problems.

CAUTION!

Using a faulty disk is risky. Faulty disks should be replaced immediately.
Contact your local dealer for information about hard disks.

Bad Sector Detection

Bad sector detection checks for bad sectors in hard disks.

Click

Maintain

HDD

Bad Sector Detect

Summary of Contents for 2MN-9004-P




































































































































Search results

Summary of Contents for 2MN-9004-P

Reviews:

Related manuals for 2MN-9004-P

Brands by name

Popular brands

2M Technology 2MN-9004-P, User Manual

Search results

Summary of Contents for 2MN-9004-P

Reviews:

Related manuals for 2MN-9004-P

Brands by name

Popular brands