2M Technology 2MN-9004-P User Manual Download Page 118

Page: 118 / 131

110

CAUTION!

Files deleted automatically cannot be recovered.

System Upgrade

Upgrade the NVR under

Maintain

Upgrade

locally (using an upgrade

file saved in a USB storage device) or by cloud (through a cloud server).

To upgrade by cloud, ensure that the NVR is connected to a fully

functional DNS server (configured under

System

Network

Basic

), and

click

Check

to see whether a newer version is available. The time that a

cloud upgrade takes is affected by network connection status.

CAUTION!



Make sure power is not interrupted during upgrade. A power failure
during system upgrade may cause startup failure. Use an
Uninterrupted Power Supply (UPS) if necessary.



Ensure network connectivity for a cloud upgrade.

Shutdown

Click

Shutdown

to log out, restart or shut down as needed. To shut

down the NVR, you may also long-press the power button on the front

panel (if available) for around three seconds till an on-screen message

appears, and then click

Yes

Summary of Contents for 2MN-9004-P




































































































































Search results

Summary of Contents for 2MN-9004-P

Reviews:

Related manuals for 2MN-9004-P

Brands by name

Popular brands

2M Technology 2MN-9004-P, User Manual

Search results

Summary of Contents for 2MN-9004-P

Reviews:

Related manuals for 2MN-9004-P

Brands by name

Popular brands