2M Technology 2MN-9004-P User Manual Download Page 114

Page: 114 / 131

106

NOTE!



The packet size is 1520 byes by default and can be changed as
needed.



The backup file of the captured packets is named in

NIC

name

time

.pcap format.



Packets cannot be captured if it is already started on the Web
interface.



If you use PPPoE or 3G/4G, a virtual NIC will appear in the list after
the dial-up succeeds, and you may capture packets sent to and from
this NIC.

Network Settings

Click

Maintain

Network Info

Network

to view network settings.

3G/4G Connectivity

Click

Maintain

Network Info

3G/4G Connectivity

to view 3G/4G

parameters.

PoE/Network Port Status

Only certain NVR models support this function.

Click

System

Network Info

to view port status. In the figure below, the

blue port is in use. For PoE models, power information will be displayed.

Summary of Contents for 2MN-9004-P




































































































































Search results

Summary of Contents for 2MN-9004-P

Reviews:

Related manuals for 2MN-9004-P

Brands by name

Popular brands

2M Technology 2MN-9004-P, User Manual

Search results

Summary of Contents for 2MN-9004-P

Reviews:

Related manuals for 2MN-9004-P

Brands by name

Popular brands