2M Technology 2MN-9004-P User Manual Download Page 20

Page: 20 / 131

No.

Description

The IP device is online, and live video is displayed.

The IP device is online, but the NVR has insufficient capacity to
decode streams from the IP device.

No permission to view live video from the IP device.

The IP device is offline.

No IP device is linked to the window.

Window Toolbar

Icon

Description

Available for PTZ cameras only. Click to display the PTZ
control window.

Set mount mode and display mode for fisheye camera.
This icon appears only for fisheye cameras.

Record live video in the window to the hard disk.

Clicking

stops recording.

Click to play video recorded during the past 5 minutes and 30
seconds.

Zoom in on an area of interest.

Click to edit image settings.

Click to take a snapshot. The window borders will flash white.
You may view and back up snapshots under

Backup

Image

Rest your mouse pointer on the icon to view live video
information. Or click it to view the channel number, camera
name, IP address, connection status and recording status.

Start two-way audio with the camera. Click

to stop. The

sound volume is adjustable.

Note

: Correct audio input and output connections are

required.

Click to turn on audio. Clicking

turns off audio. The sound

volume is adjustable.

Note

: When you turn on audio in the current window, audio

of the previous window is turned off.

Summary of Contents for 2MN-9004-P




































































































































Search results

Summary of Contents for 2MN-9004-P

Reviews:

Related manuals for 2MN-9004-P

Brands by name

Popular brands

2M Technology 2MN-9004-P, User Manual

Search results

Summary of Contents for 2MN-9004-P

Reviews:

Related manuals for 2MN-9004-P

Brands by name

Popular brands