P O Box 159 • Crestwood, KY 40014 • (877) 243-0042 • (502) 243-0039 fax
The LEDs and reset button at the bottom center of the display.
The green LED blinks once a second, indicating the
display is logging data. During a power outage this
LED will continue to blink, indicating that it is
collecting and logging data from the sensors
The Red LED blinks when the display is operating
on batteries. If an alarm occurs it will glow a steady
red.
The small hole on the left of the green and red LEDs is the reset button. Insert the paper clip slowly
until you feel the button press down. It will pop back up as soon as you release the paper clip and a
system reset will occur. (Your settings and data will be preserved).
Navigating with Easy Touch
Where to touch
Touch any value to see the logged data for
that sensor.
