P O Box 159 • Crestwood, KY 40014 • (877) 243-0042 • (502) 243-0039 fax
t
Addendum for adding a TV2 with the Wired Ethernet Option
If your TV2 has a wired Ethernet network option it will need an IP address, so it can be
identified on your Local Area Network (LAN). Each TV2 has a unique MAC address. When
you use TView to download data it identifies the TV2 by its MAC address.
When the TV2 is plugged into a hub or switch the TV2 will be assigned an IP address by the
DHCP server on your network. Access the 'Network Menu' on the System Setup page on the
TV2.
To assign a static IP address disable the DHCP first and then enter the IP address into the IP
Address position.
Whether you enable DHCP or assign a static IP address make a note of it so you can enter it
into the communication setup area of TView so you can download data.
Exit this menu by touching 'Escape'. This menu can be accessed at any time through the
'System Setup' menu.
