ZyXEL Communications ZyWall USG20-VPN Скачать руководство пользователя

Страница: 94 / 683

Chapter 5 Dashboard

USG20(W)-VPN Series User’s Guide

5.2.10 Extension Slot Screen

Figure 81

Dashboard > Extension Slot

This table describes the fields in the above screen.

5.2.11 Interface Status Summary Screen

Interfaces per USG model vary.

Figure 82

Dashboard > Interface Status Summary

Table 26

Dashboard > Extension Slot

LABEL

DESCRIPTION

Extension Slot

This field displays the name of each extension slot.

Device

This field displays the name of the device connected to the extension slot (or

none

if no device is detected). For an installed SEM (Security Extension Module)

card, this field displays what kind of SEM card is installed.

SEM-VPN

- The VPN accelerator. The SEM-VPN provides 500 Mbps VPN

throughput, 2,000 IPSec VPN tunnels, and 750 SSL VPN users.

SEM-DUAL

- accelerator for both VPN and UTM. The SEM-DUAL provides the

benefits of the SEM-VPN.

USB Flash Drive

- Indicates a connected USB storage device and the drive’s

storage capacity.

Status

The status for an installed WLAN card is

none

. For cellular (mobile broadband)

interfaces, see

Section 6.10 on page 113

for the status that can appear. For an

installed SEM (Security Extension Module) card, this field displays one of the
following:

Active

- The SEM card is working properly.

Ready to activate

- The SEM was inserted while the USG was operating.

Restart the USG to use the SEM.

Driver load failed

- An error occurred during the USG’s attempt to activate the

SEM card. Make sure the SEM is installed properly and the thumbscrews are
tightened. If this status still displays, contact your vendor.

Ready - A USB storage device connected to the USG is ready for the USG to use.

Unused

- The USG is unable to mount a USB storage device connected to the

USG.

Содержание ZyWall USG20-VPN












































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ZyWall USG20-VPN

Отзывы:

Похожие инструкции для ZyWall USG20-VPN

Бренды по названию

Популярные бренды

ZyXEL Communications ZyWall USG20-VPN, Руководство пользователя

Результаты поиска

Содержание ZyWall USG20-VPN

Отзывы:

Похожие инструкции для ZyWall USG20-VPN

Бренды по названию

Популярные бренды