ZyXEL Communications ZyWall USG20-VPN Скачать руководство пользователя страница 633

Страница: 633 / 683

Chapter 34 Packet Flow Explore

USG20(W)-VPN Series User’s Guide

633

34.3 The SNAT Status Screen

The

SNAT Status

screen allows you to view and quickly link to specific source NAT (SNAT) settings.

Click a function box in the

SNAT Flow

section, the related SNAT rules (activated) will display in the

SNAT Table

section. To access this screen, click

Maintenance

Packet Flow Explore

SNAT

Status

The order of the SNAT flow may vary depending on whether you:

• select

use default SNAT

in the

CONFIGURATION > Network > Interface > Trunk

screen.

• use policy routes to control 1-1 NAT by using the

policy control-virtual-server-rules

activate

command.

Note: Once a packet matches the criteria of an SNAT rule, the USG takes the

corresponding action and does not perform any further flow checking.

Figure 456

Maintenance > Packet Flow Explore > SNAT Status (Policy Route SNAT)

Outgoing

This is the name of an interface which transmits packets out of the USG.

Gateway

This is the IP address of the gateway in the same network of the outgoing interface.

The following fields are available if you click

Dynamic VPN or SiteToSite VPN

in the

Routing Flow

section.

This field is a sequential value, and it is not associated with any entry.

Source

This is the IP address(es) of the local VPN network.

Destination

This is the IP address(es) for the remote VPN network.

VPN Tunnel

This is the name of the VPN tunnel.

The following fields are available if you click

Default WAN Trunk

in the

Routing Flow

section.

This field is a sequential value, and it is not associated with any entry.

Source

This is the source IP address(es) from which the packets are sent.

any

means any IP

address.

Destination

This is the destination IP address(es) to which the packets are transmitted.

any

means

any IP address.

Trunk

This is the name of the WAN trunk through which the matched packets are transmitted.

Table 277

Maintenance > Packet Flow Explore > Routing Status (continued)

LABEL

DESCRIPTION

Содержание ZyWall USG20-VPN












































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ZyWall USG20-VPN

Отзывы:

Бренды по названию

Популярные бренды

ZyXEL Communications ZyWall USG20-VPN, Руководство пользователя

Результаты поиска

Содержание ZyWall USG20-VPN

Отзывы:

Бренды по названию

Популярные бренды